Robe’s proprietary optical design

High-efficiency zoom optical system, ratio 12,5:1

Zoom range: 4° - 50°

Fixture total lumen output: 10.500 lm

Illuminance: 49.000 lx @ 5 m

Innovative lens coating technology (Patent pending)

Colour mixing mode RGBW or CMY

Individual control of each RGBW pixel

White light: Variable CCT 2.700K - 8.000K

DataSwatch™ filters: pre-programmed 66 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K

Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)

Colour rainbow effect with variable speed

Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction

Innovative Flower Effect: rotating in both directions at variable speed (Patented)

Electronic strobe effect with variable speed up to 20 Hz, pre-programmed random strobe & pulse effects

High resolution electronic dimming: 0 - 100%

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Setting & Addressing: ROBE Navigation System 2 (RNS2)

Display: QVGA Robe screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, built-in analyser for easy fault finding, NFC app controller

Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net

Wireless CRMX™ technology from Lumen Radio

Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity

REAP™ - Robe Ethernet Access Portal

DMX Protocol modes: 10

Control channels: 49, 27, 33, 90, 27, 47, 91, 110, 104, 123

Pan/Tilt resolution: 16 bit

R,G,B,W colour mixing: 8 or 16 bit (internal 18 bit)

Zoom: 8 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Pan movement: 540°

Tilt movement: 220°

Movement control: Standard and Speed

Controllable speed of Pan/Tilt movement

EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patented)

Automatic Pan/Tilt position correction

Maximum ambient temperature: 45°C (113°F)

Maximum surface temperature: 75°C (167°F)

Minimum operating temperature: -10°C (14°F)

Total heat dissipation: max. 1614 BTU/h (calculated)

Power supply: Electronic auto-ranging

Input voltage range: 100-240 V, 50/60 Hz

Power consumption: max. 660 W

Power connector in: IP65 Neutrik powerCON TRUE1

DMX and RDM data in/out: IP65 Locking 5-pin XLR connectors

Embedded Ethernet switch 10/100 Mbps: 1 x in / 1 x out

Ethernet port in: 2 x IP65 RJ45 connector

CE Compliant

cETLus Compliant (pending)

Height:

• 534 mm (21.0”) – head in vertical position

• 595 mm (23.4”) – head in horizontal position

Width: 450 mm (17.7”)

Depth: 277 mm (10.9”)

Weight: 24.9 kg (54.9 lbs)

Ingress protection rating: IP65

Mounting positions: Horizontally or vertically

Universal operating position

Mounting points: 2 pairs of 1/4-turn locking points

2x Omega adaptors with 1/4-turn quick locks

Safety cable attachment point

Tilt transport lock

User Manual

Omega Adaptor CL-regular 2 pcs

Power cord including powerCON TRUE1 In connector

Doughty Trigger Clamp: 17030386

Safety wire 36 kg: 99011963

Single Top Loader Case: 10120277

Dual Top Loader Case: 10120278

Foam Shell: 20020416

iSpiider® is Registered Trademark of Robe lighting s. r. o.

iSpiider® is patented by Robe lighting s. r. o. and is protected by one or more pending or issued patents