The Robe Spiider® – Our super bright LED WashBeam luminaire has truly set the benchmark in performance! Using 18 x 40 Watt and 1 x 60 Watt LEDs, combined with a highly efficient 12,5:1 zoom optical system, ranging from tight 4° Beam to wide 50° Wash, makes the Spiider® the leader in its class. Beautiful convergence of hard edge in-air effects, punchy beams and smooth, homogenized rich colour washes are all encapsulated in the unique Spiider®!

The Spiider® product family truly sets itself apart. With the eye-catching Robe patented MCFE™ – Multi-Coloured Flower Effects – emitting sharp, multi-coloured spikes of light, including variable speed and rotation direction control to further increase the projection of charismatic in-air animations. Dynamic video effects are easily achieved by mapping individual pixels and controlled by DMX desk or media servers via sACN with internal HTP merging, DMX or by Kling-Net protocol. Equipped with Robe's innovative lens coating technology, the lenses keep bright and clear, with no scratches or marks, providing higher light output for longer intervals between cleaning.

Perfect colour and dimming control are available via RGBW and CMY colour mixing modes; our 18 Bit L3™ Low Light Linearity dimming software for imperceptible fades to black; variable CCT of 2.700K – 8.000K; tungsten emulation simulating the red shift and thermal delay of tungsten lamps for whites from 2.700K – 4.200K; and our DataSwatch™ 237 pre-programmed colour library.

Light source

1x 60W RGBW and 18 x 40W RGBW LED multichips

Light output

13.700 lm, 50.100 lx @ 5m

Zoom range

4° - 50°

Effects

pixel control, MCFE™ - Multi-Coloured Flower Effects (patented), virtual colour wheel, tungsten lamp effect, preprogrammed pixel effects

Innovations

RLCT™ – Robe lens coating technology

Just like with spectacles, our lens coating technology protects soft plastic lenses against surface scratches, that can even occur during cleaning when scrubbed repeatedly. Anti-static properties prevent dust build-up on the lenses, thus extending the period between maintenance cleaning.

FW diffusers for pixelated washers

Robe fixtures homogenise beams really well but, for the ultimate smoothness, most of our pixelated LED wash lights can easily be fitted with a Fresnel Wash (FW) diffusion filter in-between the LED array and the lenses. They can also be ordered pre-installed if desired, as FW versions.

DataSwatch™ – inbuilt virtual colour library

The DataSwatch™ inbuilt virtual colour library for Robe LED fixtures provides consistent colour rendering with commonly matched filter ranges, allowing for rapid and accurate programming.

MCFE™ – Multi Coloured Flower Effect

The Robe patented MCFE™ – Multi-Coloured Flower Effect – creates sharp, multi-coloured spikes of light, that are fully rotatable in both directions, at variable speeds.

Tungsten Emulation

When selected, the luminaire will mimic the colour temperature of a tungsten lamp as you lower the output to produce that classic warm glow.

L3™ – Low Light Linearity System

The L3™ Low Light Linearity System produces imperceptible, ultra-smooth fades to black.

REAP™ – Robe Ethernet Access Portal

The Robe Ethernet Access Portal allows to access internal data from a networked fixture, viewed as a web page, addressable via the fixtures network IP.

GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

EasyClean™

Cleaning multiple pixel lenses can be tedious and time consuming. To streamline maintenance and ensure a dust-free environment for the optics, we have developed the patented EasyClean™ lens sandwich system. This innovative design simplifies individual lens removal, cleaning and replacement.

EMS™ – Electronic Motion Stabiliser

The Robe EMS™ (Electronic Motion Stabiliser) system is a technology for precise Pan and Tilt movements, which reduces vibrations from audio outputs, truss movement and sprung or suspended floors.

QVGA Robe Touch Screen Display System

The QVGA Robe touch screen display gives full access to all fixture setup and diagnostic functions and is very intuitive to navigate.

Product Video

Accessories

Technical Specification

Expand AllDownload PDFCollapse All

Source

Light source type: 1x 60W RGBW and 18x 40W RGBW LED multichips

LED life expectancy: min. 50.000 hours

Typical lumen maintenance: L70/B50 @ 50.000 hours

Optical system

Robe’s proprietary optical design

High - efficiency zoom optical system, ratio 12,5:1

Zoom range: 4° - 50°

Fixture total lumen output:

13.700 lm (integrating sphere)
11.000 lm (goniophotometer)

Illuminance: 50.100 lx @ 5 m

(RLCT™) Innovative lens coating technology (Patent pending)

EasyClean™ - newly designed and patented lens sandwich system for easy cleaning and time saving maintenance of the lenses

Dynamic Effects and Features

Colour mixing mode RGBW or CMY

Individual control of each RGBW pixel

Variable CTO: 2.700K - 8.000K

Virtual Colour Wheel: with 66 preset swatches

Tungsten lamp effect at whites: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)

Colour rainbow effect with variable speed

Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction

MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented)

Strobe effect: variable speed (max. 20 flashes per second)

Pre-programmed random strobe & pulse effects

High resolution electronic dimming: 0 - 100%

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Control and programming

Setting & Addressing: ROBE Navigation System 2 (RNS2)

Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding

Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net

Wireless CRMX™ technology from Lumen Radio - on request

DMX Protocol modes: 10

Control channels: 49, 27, 33, 90, 27, 47, 91, 110, 104, 123

Pan/Tilt resolution: 16 bit

R,G,B,W colour mixing: 8 or 16 bit (internal 18 bit)

Zoom: 8 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Movement

Thermal specification

Electrical specification and connections

Approvals

Mechanical specification

Rigging

Included items

Optional accessories

Diffusion filter 2°: 10980416

Clear lens cover: 10980607

EggCrate: 10980317

Doughty Trigger Clamp: 17030386

Safety wire 36 kg: 99011963

Upgrade kit CRMX Universal 260: 99030100

Single Omega Bracket for one clamp - black: 10980100

Single Omega Bracket for one clamp - white: 10980129

Single Omega Bracket for one clamp - neutral: 10980113

Single Top Loader Case: 10120195-01

Dual Top Loader Case: 10120207

Quad Top Loader Case: 10120208

Foam Shell: 20020290

Legal

Related News

23.7.2025

Robe Takes a Walk in The Park

Production lighting for the vibrant and diverse Park Stage at the 2025 Glastonbury Festival was once again supplied by Bristol, UK-based SWG Events. A design by Mat Spencer – also Chief LX for the project – which included nearly 70 Robe moving lights, helped deliver great lighting for a blistering lineup including Anohni and the Johnsons, Haim, Caribou, Beth Gibbons, The Maccabees, Gary Numan and many, many more who delighted audiences throughout the three-day event.

23.6.2025

Robe Adds Some Magic to Circlassica Show

The popular Circlassica show returned to Madrid for the 2024-2025 season staged in the iconic IFEMA Madrid big white tent, with a new edition, Circlassica, la historia mundial continúa (Circlassica, the world story continues), produced by Productores de Sonrisas and lit by Juanjo Llorens who once again sprinkled some of his illuminative magic on the action.

20.6.2025

Robe Enjoys a Brilliant PALM Expo in India

Robe’s Indian distributor Integrated Entertainment Solutions (IES) enjoyed a busy, proactive and productive PALM Expo 2025 in Mumbai, the show was staged over 3 days at the Bombay Exhibition Centre (BEC), the largest privately owned permanent exhibition centre in India, and highlights included Robe’s iBOLT winning an award for “Outstanding Innovation” in the Professional Lighting Solution category.

17.6.2025

Robe Lands Huge Order to Transition Estonian Theatres to LED

Robe’s Estonian distributor, Tallin-based E&T, is in the final stages of delivering an enormous order for moving and LED lights for 10 major theatres across the country, where all forms of live performance are strongly engrained in Estonian culture, and being entertained by theatre is a hugely popular activity.